Home  ꄲ  Floor Grinder  ꄲ  Concrete Edge Floor Grinder

Concrete Edge Floor Grinder

ꄴPrevious： null
ꄲNext： Square plate remote control concrete grinding machine

Model

G250

G250

Voltage

220v,50hz

110V,60HZ

Power

2.2KW

2.2KW

Grinding width

250mm

250mm

Speed

1400rpm

1700rpm

Weight

70kg

70kg

 

  1. The floor grinding machine features a strong 2.2kw motor. That can grind concrete and stone, suitable to work on both wet and dry floor. Foldable handle and well designed frame makes our floor grinding machine very easy to be transported
  2. The floor grinding machine meets the industrial standards, it provides a cost efficient solution and meets various demands in grinding tasks. It has a bubble level that shows its proper balance and its head can be turned 80 degree left or right making easy to grind wall boarders. The floor grinding machine has a detachable dust shroud allowing it to get closer to the wall
  3. The floor grinding machine switch sneider features an over-current protection unit, when the current exceed the value, the protection unit will cut off the power supply instantly to protect electrical equipment and prevent further accidents.
  4. The foldable handle with axis adjust its height when it operation, compact structure, easy transportation and convenient storage
  5. The floor grinding machine has vacuum cleaner and water pipe ports used to dry and wet grinding
  6. The flexible coupler of the machine transmits torque effectively. The coupler features a simple structure, high carrying capacity and the ability to compensate axial and radial displacement. The coupler is applied to middle and high shaft drive transmission.

 

Contact Us >
Walk behind power trowel
Walk-behind design, flexible and easy to maneuver, suitable for narrow spaces
Dual blade structure, efficient concrete floating and troweling, smooth finish
Ergonomic handle, comfortable to push, reducing operator fatigue
Reliable power system (electric/gasoline), stable operation and long service life
Suitable for small to medium concrete projects, easy to transport and maintain
¥ 0.00
Riding Power Trowel
Power float machine is essential concrete construction equipment for floating, leveling and densifying fresh concrete floor.
It efficiently removes excess water, raises cement paste, makes the floor compact, flat and wear-resistant.
Available in walk-behind and ride-on type, equipped with reliable gasoline engine and durable blade rotor.
Widely applied in factory warehouse, parking lot, commercial building and large area concrete ground project.
¥ 0.00
Ride on power trowel
Dual rotor design, large working width & high efficiency
Smooth steering and comfortable ride-on operation
Perfect for concrete floating and final troweling
Makes concrete floor flat, dense and wear-resistant
Suitable for warehouse, parking lot and large construction sites
¥ 0.00
hydraulic ride on power trowel
Full hydraulic drive & hydraulic steering, flexible and labor-saving
Stepless speed control, stable running without vibration
Dual rotor design, large working width and high efficiency
Perfect for concrete floating and final troweling
Excellent flatness and high-gloss floor finishing effect
¥ 0.00
200mm electric scarifier
200mm working width, balanced efficiency and maneuverability
Electric-powered design, suitable for indoor & low-noise operation (zero emission)
Wear-resistant carbide cutters, high scarifying efficiency and long service life
Adjustable scarifying depth, adaptable to different surface treatment needs
Compact structure, easy to transport and operate for small to medium projects
¥ 0.00
250mm Gasoline Scarifier
1. 250mm working width, balanced efficiency and maneuverability
2. Gasoline-powered design, suitable for outdoor & no-power operation
3. Wear-resistant carbide cutters, high scarifying efficiency and long service life
4. Adjustable scarifying depth, adaptable to different surface treatment needs
5. Compact structure, easy to transport and operate for small to medium projects
¥ 0.00
300mm Lightweight floor scarifier
1. 300mm working width, balanced efficiency and maneuverability
2. Lightweight design , portable and easy to transport, single-person operable
3. Wear-resistant carbide cutters, high scarifying efficiency and long service life
4. Adjustable scarifying depth, adaptable to different surface treatment needs
5. Compact structure, suitable for narrow spaces and indoor small-scale construction
¥ 0.00
adjustable speed hydraulic concrete scarifier
Full hydraulic drive system, strong power and stable output
Adjustable working speed for different construction demands
Precise controllable milling depth for uniform scarifying
Efficiently remove laitance, epoxy, road lines and old coatings
Durable roller cutter design, long service life and easy maintenance
¥ 0.00
heavy duty concrete scarifier
Heavy-duty industrial structure, strong load-bearing capacity for long-time heavy work
Wear-resistant carbide cutters, high efficiency and long service life
Adjustable scarifying depth, suitable for different construction requirements
Efficiently removes laitance, epoxy, road markings and damaged concrete layers
Stable operation, low vibration and easy maintenance for industrial use
¥ 0.00
Underfloor heating milling machine
Floor Heating Pipe Grooving Machine is a professional tool for floor heating installation, used for grooving concrete, cement and other grounds to embed floor heating pipes. High-power motor and alloy saw blade ensure fast speed and high precision. Adjustable grooving depth and width, with dust collection function and overload protection, safe and efficient. Suitable for residential, commercial and industrial floor heating construction, reducing labor and improving construction quality.
¥ 0.00
dual heads floor grinding and polishing machine
This dual-head floor grinding and polishing machine adopts twin disc planetary rotating structure, featuring wider working width, more uniform grinding effect and higher construction efficiency. It is designed for concrete surface preparation, leveling, coating removal and high-gloss polishing of concrete, terrazzo and epoxy floors. Standard vacuum dust port supports dust-free operation, making it an ideal equipment for flooring contractors and large-scale engineering projects.
¥ 0.00
Concrete grinding and polishing machine
Adopts integrated one-piece gearbox structure, more stable transmission
High torsion & strong load capacity for long-time heavy duty work
Low vibration, low noise and fewer mechanical failures
No complicated belt/chain adjustment, lower maintenance cost
Perfect for concrete, terrazzo, epoxy floor grinding and polishing
¥ 0.00
hand push floor scraper
hand-push high frequency floor scraper is lightweight and flexible, easy to operate and labor-saving. Equipped with high-frequency vibration system, it features strong striking force, high working efficiency and stable performance.
It is widely used to remove floor paint, epoxy coating, old cement layer, adhesive residue, tile glue and ground leveling layer. Suitable for construction sites, warehouse, workshop, shopping mall and other floor renovation projects.
The machine adopts durable int
¥ 0.00
Remote Control Ride-on Floor Scraper
Equipped with a high-power drive system and a heavy-duty scarifying/scraping mechanism, the machine can quickly and thoroughly remove epoxy floors, old paint layers, mortar residues, tile glue, uneven cement surfaces and other stubborn attachments. The wireless remote control has a stable signal, with a control distance of up to 50-100 meters, allowing operators to control the machine remotely in a safe area, avoiding potential safety hazards such as dust and noise during on-site operation. The
¥ 0.00
Industrial Wet and Dry Vacuum Cleaner
Heavy duty wet & dry industrial vacuum cleaner, supports both dry dust and wet liquid cleaning. Powerful suction, large capacity tank, sturdy structure, easy maintenance. Widely used in construction, floor grinding, workshop, factory and renovation sites for dust, water and debris cleaning.
¥ 0.00
Industrial Vacuum Cleaner
compact design for easy transportation, strong suction power with ametek vacuum motors,suitable for small and medium size floor grinder
¥ 0.00
concrete floor grinding and polishing machine
This floor grinder adopts integrated gearbox structure, compact and sturdy body. It delivers stable power transmission, low vibration and low noise during operation. Widely used for concrete grinding, surface polishing, floor renovation and epoxy coating removal. High grinding efficiency, durable performance, easy operation and maintenance.
¥ 0.00
Concrete edge floor grinder
Professional concrete edge floor grinder for wall side & corner concrete grinding and polishing. Close to wall ultra-thin design, variable speed control, equipped with dust port for dust-free working. Suitable for concrete floor edge treatment, old coating removal, floor renovation and terrazzo polishing. Durable, easy maneuverable and high efficiency for floor contractors.
¥ 0.00
concrete floor grinding machine
The concrete floor grinding machine equipped with a diamond cup wheel is a high-efficiency, professional floor processing tool widely used in construction, floor renovation, and industrial ground treatment projects. Adopting high-hardness industrial diamond cup wheels as the core grinding component, this machine delivers superior grinding performance, outstanding wear resistance and long service life compared with traditional abrasive tools.
¥ 0.00
brushless floor grinder
Brushless motor design – no carbon brush replacement, maintenance free
Higher power & lower heat, longer continuous working time
Low noise and stable running, more comfortable operation
Stepless speed control for grinding and polishing modes
Fit for concrete, terrazzo, epoxy floor grinding and renovation
¥ 0.00
variable speed concrete floor grinder polisher
Precise Variable Speed Control for Multi-Scenario Applications;
High-Efficiency & Stable Power Performance;
Dual Wet & Dry Grinding Functionality;
Dust-Free & Environment-Friendly Operation;
Ergonomic & User-Friendly Design;
Durable Construction & Low Maintenance Cost;
¥ 0.00
Gasoline Floor Grinder
Gasoline Floor Grinder is a high-efficiency, portable heavy-duty floor processing equipment, powered by a high-performance gasoline engine. It is specially designed for grinding, leveling, polishing and renovating concrete, cement, terrazzo and epoxy floors, suitable for outdoor and areas without power supply. With strong power, stable operation and easy mobility, it is an ideal tool for construction sites, roads, parking lots, workshops and outdoor floor renovation projects.
¥ 0.00
remote control planetary grinder machine
Remote Control Planetary Grinder Machine integrates planetary rotation grinding structure and wireless remote control technology. It supports remote start, speed adjustment and walking control, freeing operators from long-term vibration work. Planetary disc design ensures no dead-angle grinding, uniform floor finish and high polishing effect. Compatible with industrial vacuum cleaner for dust-free operation, ideal for large-area concrete, terrazzo, epoxy floor grinding, polishing and old coating
¥ 0.00
Planetary floor grinding machine
Planetary floor grinding machine adopts planetary rotation design with multiple grinding discs rotating in planetary orbit. It features stable operation, no dead-angle grinding, uniform grinding and polishing effect, no scratches on the floor. Suitable for concrete, terrazzo, marble and epoxy floor grinding, coating removal and floor renovation. With high power, heavy duty body and vacuum interface for dust-free working, it is widely used in industrial workshops, warehouses and building
¥ 0.00
Large Remote Control Floor Grinder
Wireless remote control, easy operation and labor-saving
Large working width, high construction efficiency
Heavy-duty structure, durable and stable performance
Multi-functional use for grinding, leveling and polishing
Low vibration, low noise, convenient maintenance
¥ 0.00
high speed concrete floor polishing machine
This high speed concrete floor polishing machine adopts planetary rotating design with stable high running speed, delivering high polishing efficiency and perfect floor glossiness. It is suitable for concrete, epoxy, marble, granite and terrazzo floor grinding, polishing and renovation. Self-propelled optional design saves labor, runs steadily with low noise, ideal for commercial buildings, warehouses, workshops and large floor engineering projects.
¥ 0.00
epoxy floor grinder with vacuum cleaner
Epoxy floor grinder with vacuum cleaner is an integrated dust-free grinding solution for epoxy coating removal and concrete floor treatment. Matched with professional two-stage filtration vacuum cleaner, it instantly absorbs grinding dust and powder during operation, realizing dust-free construction. The planetary grinder features stable running, uniform grinding effect, ideal for epoxy surface removing, concrete rough grinding, fine polishing and floor renovation. Perfect for workshop, warehous
¥ 0.00
Square plate remote control concrete grinding machine
This remote control concrete grinding machine is equipped with square grinding plates, designed for efficient floor grinding, leveling, polishing and surface treatment.
It adopts wireless remote control operation, easy to maneuver, greatly reduce labor intensity and improve working safety. Built with sturdy heavy-duty frame, stable running performance and strong grinding power.
Ideal for grinding concrete floor, epoxy floor, cement floor, terrazzo floor, removing old coatings, paint residues and
¥ 0.00
ride on floor scraper
Ride On Floor Scraper is a heavy-duty, self-propelled industrial machine designed for large-area flooring removal. It features a comfortable ride-on seat, powerful hydraulic system, and interchangeable scraper blades to efficiently remove tile, vinyl, VCT, carpet, hardwood, glue, adhesive, epoxy and coatings. Perfect for warehouses, shopping malls, gyms, commercial buildings and industrial floor renovation. Battery-powered or electric, high productivity, low operator fatigue, ideal for big floor
¥ 0.00
Floor Grinding Two Stage Vacuum
Floor Grinding Two Stage Vacuum is specially designed for concrete floor grinding and polishing. Adopting two-stage dust filtration and separation system, it firstly traps large coarse dust, then filters fine powder in the second stage. It effectively prevents filter clogging, maintains stable strong suction, and extends filter service life. Wet & dry dual-use, heavy duty industrial grade, perfectly matched with floor grinders and polishers for construction, workshop and floor renovation dust co
¥ 0.00
Concrete Floor Grinding Two-stage Filtration Vacuum
Designed specially for concrete floor grinding and polishing, built-in two-stage filtration system to separate coarse and fine dust step by step.
Two-stage filtration structure effectively reduces filter load, extends filter service life and lowers maintenance cost.
Heavy duty strong suction and stable airflow, support long-hour continuous working on construction sites and workshops.
Wet & dry dual-use function, suitable for dry cement dust, concrete slurry and wet residue cleaning.
¥ 0.00
Two-stage Filtration Industrial Vacuum Cleaner
Two-stage filtration industrial vacuum cleaner with dual separation & filtration design, wet dry heavy duty use, effectively separate and filter coarse and fine dust, ideal for floor grinding, construction and workshop industrial dust collection.
¥ 0.00
industrial vacuum cleaner with pre separator
Equipped with professional cyclone pre separator, effectively separate large dust and particles in advance, reduce filter clogging and extend filter service life.
Wet & Dry dual use design, perfect for concrete floor grinding, polishing, construction site and workshop dust collection.
Heavy duty industrial grade performance, strong suction power, stable operation, suitable for long-time continuous working.
Match perfectly with floor grinding machines and polishing machines, ideal for industrial
¥ 0.00
heavy duty industrial vacuum cleaner with turbine motor
Three-phase pure copper turbo motor, low noise, wear-resistant, long service life
Integrated bagging design, fast bag changing, labor-saving and dust-free cleaning
High negative pressure & large air volume, strong suction for heavy dust and debris
Efficient filter system, intercept fine powder, meet environmental protection standards
Overload and phase loss protection, safe industrial operation
Simple maintenance, washable filter cartridge, low use cost
¥ 0.00
Concrete Edge Floor Grinder
The Concrete Edge Floor Grinder is a compact, maneuverable professional tool engineered for precision grinding, leveling and polishing concrete, stone and terrazzo floor edges. It perfectly covers tight corners, wall edges and narrow spaces that large floor grinders cannot access, eliminating tedious manual finishing.
¥ 0.00
넳 넲

Recommended Products